How to actually rank POD suppliers
Every "best print-on-demand companies" listicle ranks suppliers by catalog size and integrations. That is the wrong lens once you are already running ads and shipping real orders.
What decides your margin is the full supplier invoice, not the price in the product editor. The supplier bills you base cost, plus supplier shipping, plus tax where it applies — so the number you see per variant is never what you actually pay. If that distinction is new, start with the full breakdown in our guide to POD cost economics.
So this comparison ranks the top suppliers on four things that move profit: base cost, shipping structure, paid-plan break-even, and fit by geography. Say you run 340 orders a month at a $31 average order value — those four levers decide whether you keep $14 or $9 per order.
The three suppliers that matter
Printify — the marketplace
Printify is not a factory; it is a marketplace of independent print providers, each setting its own base cost and shipping. That is why the same blueprint can cost two different amounts, and it is also why Printify usually posts the lowest base cost.
On a Gildan 64000 tee, the base cost runs around $6.21 on a cheap Printify provider versus roughly $12.95 on Printful, according to a 2026 Printful-vs-Printify breakdown from MerchTitans. That three-to-four-dollar-per-shirt gap is the whole reason most "which is cheaper" articles exist.
The free plan covers up to 5 stores at no cost; Premium runs $39 a month, or $299 a year ($24.99 a month) with up to 20% off most catalog products and up to 33% off newly launched ones, per Printify's pricing page. We break the paid tier down in detail in our guide to Printify Premium pricing.
Printful — the owned network
Printful runs its own production facilities, so quality and turnaround are more consistent provider-to-provider. You pay for that with a higher base cost on most apparel.
Printful consolidated its plans into Free and Growth. Growth is $24.99 a month, gives up to 33% off product pricing plus 25% off sample orders, and becomes free once your store reaches $12,000 a year in sales, according to Printful's pricing page (the free plan still gets 20% off samples). The key structural point: Printful's plans gate discounts, not features — so Growth is a pure volume calculation, not a feature unlock.
Gelato — the distributed network
Gelato's edge is geography. It routes each order to the facility nearest the customer across a network Gelato describes as more than 130 production hubs in over 30 countries, which keeps cross-border shipping closer to domestic cost and speed.
Gelato+ runs about $23.99 a month (or $19.99 a month billed annually) for up to 30% off products and up to 50% off shipping, per Gelato's pricing page. If a meaningful slice of your orders ships to the EU, UK, or Australia, Gelato's shipping savings often beat Printify's lower US base cost on those specific orders.
Base cost is only one of three cost lines
The single most common margin error is "retail price minus base cost equals profit." It skips supplier shipping and payment fees, and ignores the shipping you charge the customer.
Both Printify and Printful price supplier shipping on a first-item / additional-item basis: the first item pays the full rate, each additional item from the same provider pays far less. A representative US apparel rate is about $3.99 for the first item and roughly $2.00 for each additional, according to ecommerceceo.com's 2026 shipping breakdown. This is why average order value, not base cost, dominates POD margin math.
Here is the worked version. Say you sell a Bella+Canvas tee at $24.99 with $5.99 shipping, so the customer pays $30.98:
| Line | Amount |
|---|---|
| Customer pays (product + shipping) | $30.98 |
| Base cost (mid-range tee) | −$9.04 |
| Supplier shipping (first item, US) | −$3.99 |
| Payment fee (say 2.9% + 30¢) | −$1.20 |
| Profit on one tee | ≈ $15.76 |
Base cost and shipping above are 2026 figures from MerchTitans and ecommerceceo.com; the retail price and processor fee are example assumptions. Now add a second tee to the same order: the additional-item shipping is only about $2.00, so the second unit adds roughly $13 of profit on $25 of retail. Bundling, not shaving a dime off base cost, is where the real margin lives.
Does the paid plan pay for itself?
Both Printify Premium and Printful Growth are volume decisions, not upgrades everyone should buy. The math is simple division.
Take Printify Premium's up-to-20% discount on a $12 average base cost, per Printify's pricing page — that is about $2.40 saved per order. Against the annual rate of $24.99 a month, $24.99 ÷ $2.40 ≈ 10–11 orders a month to break even. Against the $39 monthly rate, $39 ÷ $2.40 ≈ 16–17 orders a month. Below that, the free plan is the correct choice.
Printful Growth is even cleaner: it pays for itself the month your discount savings clear $24.99, and it is free entirely once you cross $12,000 a year in sales, per Printful's pricing. For a deeper look at where free plans stop and paid tiers start, see our breakdowns of Printify's pricing plans and the free Printify plan.
One note Printify sellers should log: the Premium monthly rate rose from $29 to $39 in February 2026 while the annual rate held, according to ecommerceceo.com. That change made annual billing materially better value for steady sellers.
Which supplier should you pick?
- Mostly US orders, margin-sensitive: Printify. The marketplace base cost is hard to beat, and you can assign cheaper US providers per listing.
- Quality and consistency matter more than a few cents: Printful. Fewer reprints and refunds can outweigh the higher base cost, since every reprint is a pure-loss order.
- Real international volume: Gelato. Local fulfillment keeps cross-border orders from drowning in shipping — which matters more now that the US ended its $800 de minimis duty exemption on imports in August 2025, according to merchone.com's 2026 tax guide. Overseas-to-US fulfillment is no longer duty-free.
In practice, most serious stores use two: a low-cost domestic supplier plus a distributed one for international orders. One more lever most sellers skip — free shipping is never free, since you absorb the supplier's shipping cost into price, so model it before you advertise it. Our guide to Printify's free-shipping math walks through exactly how that hits margin.
Knowing your real per-order profit by supplier
Picking the right supplier only pays off if you can see what each one actually nets you after ad spend. That is the number almost no POD dashboard shows, because the product cost lives at the supplier, the ad cost lives at Meta and Google, and the order lives at Shopify.
That gap is the job PodVector AI built Victor to close. Victor is an AI employee who connects your Shopify store, Meta Ads, Google Ads, Klaviyo, and your Printify, Printful, and Gelato accounts, then computes the true per-order profit on every product.
Because product costs from Printify, Printful, and Gelato are known before your first sale, Victor can tell you which supplier leaves more margin on each SKU, pause the ad set that is selling your thinnest-margin product at a loss, reprice the items the numbers say are underwater, and deliver the profit report to your Google Drive. He is not a dashboard you read — he does the work and makes the change inside the tools.
FAQs
Who are the top print-on-demand suppliers for custom products?
For store owners selling custom apparel and goods, the three to compare are Printify, Printful, and Gelato. Printify is a marketplace of independent providers with the lowest typical base cost, Printful is an owned network built for consistency, and Gelato is a distributed network built for international orders. Bigger listicles add names like Gooten and SPOD, but these three cover the vast majority of serious POD volume.
Which POD supplier is cheapest?
On base cost, Printify usually wins — a Gildan 64000 tee runs around $6.21 on a cheap provider versus roughly $12.95 on Printful, per MerchTitans. But "cheapest" is destination-specific: a distant low-cost provider can lose the savings on shipping and slower delivery, and a cheap provider that misses a Q4 deadline costs far more than the few cents it saved.
Do I need to pay for Printify Premium or Printful Growth?
Only above a break-even volume. Printify Premium's roughly 20% discount on a $12 base cost saves about $2.40 an order, so you need about 10–11 orders a month (annual billing) or 16–17 (monthly) to justify it. Printful Growth pays off once your discount savings beat its $24.99 monthly fee and is free above $12,000 a year in sales, per Printful.
Can I use more than one POD supplier at once?
Yes, and most high-volume stores do. A common setup is a low-cost domestic supplier for US orders plus a distributed supplier like Gelato for international ones, so each order ships close to the customer. The watch-out is mixing providers inside a single order — that ships as two parcels and charges you two first-item shipping rates.
How do I know my real profit on each supplier?
You have to combine three data sources: the supplier's base cost and shipping, your payment and platform fees, and your ad spend per product. Doing that by hand across Shopify, Meta, Google, and your print provider is where most sellers give up. Victor at PodVector AI stitches those together and computes the true per-order profit for you, so supplier choice becomes a numbers decision instead of a guess.